Thommen — exocad DentalCAD — Implants

26 libraries

Thommen — 26 libraries for exocad DentalCAD — Implants in the catalog.

The Thommen hub brings together exocad DentalCAD implant libraries built around the Thommen system and its DyTi-Base components. The catalog currently lists 26 products, including lines such as the Thommen DyTi-Base PF 3 5 Coated Captive Screw and the Thommen DyTi-Base PF 3 5 PEEK Removable Screw.

The libraries cover titanium bases and related geometries used to design implant-supported restorations within the DentalCAD workflow.

Implants
DyTi-Base PF 3 5 Coated Captive Screw

Thommen DyTi-Base PF 3 5 Coated Captive Screw

Thommen DyTi-Base PF 3.5 Coated Captive Screw library for exocad DentalCAD, containing the Ti-Base geometry for the coated variant with captive screw on the PF 3.5 platfo

68 Register to downloadDownload
Implants
DyTi-Base PF 5 0 PEEK Captive Screw

Thommen DyTi-Base PF 5 0 PEEK Captive Screw

Thommen DyTi-Base PF 5.0 PEEK with captive screw — a Ti-Base library for exocad DentalCAD used to design restorations on the PF 5.0 Thommen interface.

67 Register to downloadDownload
Implants
DyTi-Base PF 5 0 Coated Captive Screw

Thommen DyTi-Base PF 5 0 Coated Captive Screw

Thommen DyTi-Base PF 5.0 Coated with captive screw — a Ti-Base library for exocad DentalCAD targeting the wider PF 5.0 Thommen interface.

64 Register to downloadDownload
Implants
Milling Abutment

Thommen Milling Abutment

Thommen Milling Abutment library for exocad DentalCAD with abutment geometry for designing custom milled abutments on Thommen implants.

62 Register to downloadDownload
Implants
DyTi-Base PF 3 5 PEEK Removable Screw

Thommen DyTi-Base PF 3 5 PEEK Removable Screw

Thommen DyTi-Base PF 3.5 PEEK Removable Screw library for exocad DentalCAD with Ti-Base geometry for the PEEK PF 3.5 component.

57 Register to downloadDownload
Implants
VARIOmulti Gen1 multiunit

Thommen VARIOmulti Gen1 multiunit

Thommen VARIOmulti Gen1 multiunit library for exocad DentalCAD providing the Gen1 Multi-Unit (MU) geometry for screw-retained bridge and bar designs.

57 Register to downloadDownload
Implants
DyTi-Base PF 4 5 PEEK Captive Screw

Thommen DyTi-Base PF 4 5 PEEK Captive Screw

Thommen DyTi-Base PF 4.5 PEEK with captive screw — a Ti-Base library for exocad DentalCAD used when designing implant restorations on this Thommen interface.

56 Register to downloadDownload
Implants
DyTi-Base PF 5 0 Coated Removable Screw

Thommen DyTi-Base PF 5 0 Coated Removable Screw

Thommen DyTi-Base PF 5.0 Coated with removable screw — a Ti-Base library for exocad DentalCAD targeting the PF 5.0 Thommen interface.

52 Register to downloadDownload
Implants
PF3 0 VARIOunite

Thommen PF3 0 VARIOunite

Thommen PF3 0 VARIOunite library for exocad DentalCAD providing geometry of the VARIOunite PF3.0 interface for implant-supported restoration design.

51 Register to downloadDownload
Implants
DyTi-Base PF 4 5 Coated Removable Screw

Thommen DyTi-Base PF 4 5 Coated Removable Screw

Thommen DyTi-Base PF 4.5 Coated Removable Screw Ti-Base library for exocad DentalCAD, used to design implant-supported restorations on this Thommen geometry.

50 Register to downloadDownload
Implants
VARIOflex temp peek ScanAb

Thommen VARIOflex temp peek ScanAb

Thommen VARIOflex temp peek ScanAb library for exocad DentalCAD with the temporary PEEK scan abutment geometry used for provisional implant restorations.

49 Register to downloadDownload
Implants
Ti-Base

Thommen Ti-Base

Thommen Ti-Base library for exocad DentalCAD with titanium base geometry for designing crowns, bridges and hybrid abutments on Thommen implants.

48 Register to downloadDownload
Implants
DyTi-Base PF 3 5 Coated Removable Screw

Thommen DyTi-Base PF 3 5 Coated Removable Screw

Thommen DyTi-Base PF 3.5 Coated Removable Screw library for exocad DentalCAD with Ti-Base geometry for implant restorations on the PF 3.5 platform.

46 Register to downloadDownload
Implants
DyTi-Base PF 4 5 PEEK Removable Screw

Thommen DyTi-Base PF 4 5 PEEK Removable Screw

Thommen DyTi-Base PF 4.5 PEEK with removable screw — a Ti-Base library for exocad DentalCAD used to design implant restorations on this Thommen platform.

46 Register to downloadDownload
Implants
VARIOflex temp

Thommen VARIOflex temp

Thommen VARIOflex temp library for exocad DentalCAD with temporary component geometry for designing provisional implant restorations on Thommen implants.

46 Register to downloadDownload
Implants
DyTi-Base PF 4 0 PEEK Removable Screw

Thommen DyTi-Base PF 4 0 PEEK Removable Screw

Thommen DyTi-Base PF 4.0 PEEK Removable Screw Ti-Base library for exocad DentalCAD, used to design implant-supported restorations on this Thommen geometry.

42 Register to downloadDownload
Implants
DyTi-Base PF 3 5 PEEK Captive Screw

Thommen DyTi-Base PF 3 5 PEEK Captive Screw

Thommen DyTi-Base PF 3.5 PEEK Captive Screw library for exocad DentalCAD, providing the Ti-Base geometry for the PEEK variant with captive screw on the PF 3.5 platform.

37 Register to downloadDownload
Implants
VARIOmulti Gen2 multiunit

Thommen VARIOmulti Gen2 multiunit

Thommen VARIOmulti Gen2 multiunit library for exocad DentalCAD providing the updated Gen2 Multi-Unit (MU) geometry for screw-retained prosthetics.

37 Register to downloadDownload
Implants
DyTi-Base PF 4 5 Coated Captive Screw

Thommen DyTi-Base PF 4 5 Coated Captive Screw

Thommen DyTi-Base PF 4.5 Coated Captive Screw Ti-Base library for exocad DentalCAD, used to design implant-supported restorations on this Thommen geometry.

33 Register to downloadDownload
Implants
DyTi-Base PF 4 0 Coated Captive Screw

Thommen DyTi-Base PF 4 0 Coated Captive Screw

Thommen DyTi-Base PF 4.0 Coated Captive Screw Ti-Base library for exocad DentalCAD, used to design implant-supported restorations on this Thommen geometry.

32 Register to downloadDownload
Implants
DyTi-Base PF 4 0 PEEK Captive Screw

Thommen DyTi-Base PF 4 0 PEEK Captive Screw

Thommen DyTi-Base PF 4.0 PEEK Captive Screw Ti-Base library for exocad DentalCAD, used to design implant-supported restorations on this Thommen geometry.

31 Register to downloadDownload
Implants
Ti-Base peek ScanAb

Thommen Ti-Base peek ScanAb

exocad DentalCAD library with Thommen Ti-Base geometry aligned to the PEEK ScanAb scannable component for bonded restorations on Thommen implants.

30 Register to downloadDownload
Implants
DyTi-Base PF 5 0 PEEK Removable Screw

Thommen DyTi-Base PF 5 0 PEEK Removable Screw

Thommen DyTi-Base PF 5.0 PEEK with removable screw — a Ti-Base library for exocad DentalCAD targeting the PF 5.0 Thommen interface.

28 Register to downloadDownload
Implants
VARIOmulti Ti-Base multiunit support

Thommen VARIOmulti Ti-Base multiunit support

Thommen VARIOmulti Ti-Base multiunit support library for exocad DentalCAD with Ti-Base and Multi-Unit (MU) geometry for restorations on multi-unit abutments.

23 Register to downloadDownload
Implants
DyTi-Base PF 4 0 Coated Removable Screw

Thommen DyTi-Base PF 4 0 Coated Removable Screw

Thommen DyTi-Base PF 4.0 Coated Removable Screw Ti-Base library for exocad DentalCAD, used to design implant-supported restorations on this Thommen geometry.

22 Register to downloadDownload
Implants
Milling Abutment peek ScanAb

Thommen Milling Abutment peek ScanAb

Library for exocad DentalCAD with Thommen Milling Abutment geometry adapted to the PEEK ScanAb scannable component for designing milled abutments.

19 Register to downloadDownload
Nothing found

FAQ — Thommen

How do I install a Thommen library in exocad DentalCAD?
After signing in, use the Download button to receive the file directly. Unzip the archive and place the library folder into the exocad DentalCAD implant library directory, or add it through exocad Library Manager, then restart the program so the new Thommen components appear in the catalog.
How many Thommen libraries are in the catalog?
The catalog currently lists 26 Thommen products, including lines such as the Thommen DyTi-Base PF 3 5 Coated Captive Screw and the Thommen DyTi-Base PF 3 5 PEEK Removable Screw.
What are Thommen libraries used for in the DentalCAD workflow?
They provide the titanium-base and abutment geometries needed to design implant-supported restorations in DentalCAD — including single-unit crowns and multi-unit structures — so the digital design matches the physical Thommen components used in the case.
What format are Thommen libraries delivered in?
Each Thommen library is delivered as a ZIP archive containing the files required by exocad DentalCAD. After extraction, the library is compatible with the DentalCAD implant workflow and can be loaded through the standard exocad library directory or Library Manager.