Implants
CAMLOG ti-base CADCAM bridge
Camlog CAMLOG ti-base CADCAM bridge
Camlog CAMLOG Ti-Base library for CAD/CAM bridge designs in exocad DentalCAD, supporting mesostructures bonded to Camlog titanium bases.
Camlog — exocad DentalCAD — Implants
51 libraries
Camlog — 51 libraries for exocad DentalCAD — Implants in the catalog.
Camlog is a dental implant system whose exocad DentalCAD libraries in this catalog cover titanium bases, abutments and multi-unit geometries for designing implant-supported restorations. The collection includes 51 products, among them the Camlog CAD-CAM Camlog Ti Base and Camlog CAMLOG COMFOUR multiunit lines, giving CAD technicians references for screw-retained and multi-unit full-arch workflows within DentalCAD.
Implants
CONELOG ti-base CADCAM crown
Camlog CONELOG ti-base CADCAM crown
Camlog CONELOG ti-base CADCAM crown library for exocad DentalCAD with Ti-Base and crown component for single-tooth implant restorations on CONELOG.
Implants
CONELOG Ti-base CADCAM crown 6-cam
Camlog CONELOG Ti-base CADCAM crown 6-cam
Camlog CONELOG Ti-base CADCAM crown 6-cam library with Ti-Base and crown geometry for designing implant-supported crowns in exocad DentalCAD.
Implants
iSy multi cap implant base
Camlog iSy multi cap implant base
Camlog iSy multi cap implant base library providing the Ti-Base geometry for designing restorations on the iSy multi cap interface in exocad DentalCAD.
Implants
CAD-CAM Camlog Ti Base
Camlog CAD-CAM Camlog Ti Base
Camlog CAD-CAM Ti Base component library for exocad DentalCAD, providing the titanium base geometry used to design implant-supported restorations.
Implants
CONELOG abutment CAM CoCr-blank ME SmartShape 6-cam
Camlog CONELOG abutment CAM CoCr-blank ME SmartShape 6-cam
Camlog CONELOG abutment CAM CoCr-blank ME SmartShape 6-cam library for designing custom SmartShape CoCr abutments in exocad DentalCAD.
Implants
CONELOG gingiva former CAM Ti-blank IAC ME 6-cam
Camlog CONELOG gingiva former CAM Ti-blank IAC ME 6-cam
Camlog CONELOG gingiva former CAM Ti-blank IAC ME with 6-cam indexing for exocad DentalCAD, used to model soft-tissue formers on the CONELOG interface.
Implants
CONELOG Gingividual-basic for Ti-base-CADCAM-free
Camlog CONELOG Gingividual-basic for Ti-base-CADCAM-free
Camlog CONELOG Gingividual-basic Ti-Base CADCAM free-rotation library for splinted multi-unit restorations on the CONELOG connection in exocad DentalCAD.
Implants
CAMLOG Gingividual-basic for One-piece-abutment
Camlog CAMLOG Gingividual-basic for One-piece-abutment
Camlog CAMLOG Gingividual-basic for one-piece abutments — abutment component library for exocad DentalCAD used to design individualised implant restorations.
Implants
CONELOG gingiva former CAM ti-blank IAC ME
Camlog CONELOG gingiva former CAM ti-blank IAC ME
Camlog CONELOG gingiva former CAM ti-blank IAC ME geometry for exocad DentalCAD, used to design milled soft-tissue formers on the CONELOG connection.
Implants
iSy-Titanium-base CAD-CAM free crown
Camlog iSy-Titanium-base CAD-CAM free crown
Camlog iSy Titanium base library for exocad DentalCAD with Ti-Base and a free crown component for single-tooth restorations on the iSy implant.
Implants
CAMLOG abutment CAM ti-blank IAC ME
Camlog CAMLOG abutment CAM ti-blank IAC ME
Camlog CAM ti-blank IAC ME abutment library for exocad DentalCAD, used to design individually milled titanium abutments on the Camlog connection.
Implants
CAMLOG COMFOUR multiunit
Camlog CAMLOG COMFOUR multiunit
Camlog COMFOUR Multi-Unit (MU) library for exocad DentalCAD, used to design screw-retained bridges and full-arch restorations on COMFOUR abutments.
Implants
CAMLOG gingiva former CAM ti-blank IAC ME
Camlog CAMLOG gingiva former CAM ti-blank IAC ME
Camlog CAMLOG IAC ME gingiva former CAM titanium blank library for exocad DentalCAD, used to design custom emergence profiles on this preformed blank.
Implants
CONELOG Gingividual-basic for One-piece-abutment
Camlog CONELOG Gingividual-basic for One-piece-abutment
Camlog CONELOG Gingividual-basic abutment library for designing one-piece custom abutments on the CONELOG connection in exocad DentalCAD.
Implants
iSy scanbody gingiva former CAM Ti Blank type IAC ME
Camlog iSy scanbody gingiva former CAM Ti Blank type IAC ME
Camlog iSy scanbody for the gingiva former and CAM Ti Blank type IAC ME, used to align implant position in exocad DentalCAD.
Implants
camlog one piece abutment CAM CoCr-Blank type ME
Camlog camlog one piece abutment CAM CoCr-Blank type ME
Camlog one piece abutment library for exocad DentalCAD on a CoCr blank of type ME, defining the abutment geometry for the Camlog connection.
Implants
iSy multi cap one piece abutment CAM Ti Blank type IAC ME
Camlog iSy multi cap one piece abutment CAM Ti Blank type IAC ME
Camlog iSy one-piece abutment (CAM Ti Blank, type IAC ME) component for designing customised implant abutments in exocad DentalCAD.
Implants
CONELOG abutment CAM Ti-blank IAC ME 6-cam
Camlog CONELOG abutment CAM Ti-blank IAC ME 6-cam
Camlog CONELOG CAM Ti-blank IAC ME abutment with 6-cam indexing for exocad DentalCAD, used to design custom implant abutments on the CONELOG interface.
Implants
CONELOG Ti-base CADCAM free crown 6-cam
Camlog CONELOG Ti-base CADCAM free crown 6-cam
Camlog CONELOG Ti-base CADCAM free crown 6-cam library with Ti-Base and crown components for flexible emergence design in exocad DentalCAD.
Implants
Hybrid-Camlog CAM
Camlog Hybrid-Camlog CAM
Camlog Hybrid-Camlog CAM library for exocad DentalCAD with references for designing implant-supported restorations on the Hybrid-Camlog CAM interface.
Implants
CAMLOG multiunit
Camlog CAMLOG multiunit
Camlog CAMLOG Multi-Unit (MU) library for exocad DentalCAD, used to design screw-retained bridges and full-arch restorations on Camlog MU abutments.
Implants
CAMLOG ti-base CADCAM crown
Camlog CAMLOG ti-base CADCAM crown
Camlog CAMLOG Ti-Base library with coping/crown components for designing single implant crowns in exocad DentalCAD on Camlog titanium bases.
Implants
CONELOG ti-base CADCAM bridge
Camlog CONELOG ti-base CADCAM bridge
Camlog CONELOG ti-base CADCAM bridge library for exocad DentalCAD providing the Ti-Base geometry for designing implant-supported bridges on CONELOG.
Implants
CONELOG Ti-base CADCAM bridge 6-cam
Camlog CONELOG Ti-base CADCAM bridge 6-cam
Camlog CONELOG Ti-Base CADCAM bridge library with 6-cam interface for multi-unit bridge designs on the CONELOG connection in exocad DentalCAD.
Implants
CONELOG ti-base CADCAM free crown
Camlog CONELOG ti-base CADCAM free crown
Camlog CONELOG ti-base CADCAM free crown library for exocad DentalCAD with Ti-Base and a flexible crown component for single-tooth CONELOG restorations.
Implants
iSy scanbody one piece abutment CAM CoCr-Blank type ME
Camlog iSy scanbody one piece abutment CAM CoCr-Blank type ME
Camlog iSy one-piece abutment set (CAM CoCr-Blank, type ME) with scanbody and abutment components for designing CoCr abutments in exocad DentalCAD.
Implants
iSy scanbody one piece abutment CAM Ti Blank type IAC ME
Camlog iSy scanbody one piece abutment CAM Ti Blank type IAC ME
Camlog iSy one-piece abutment CAM Ti Blank type IAC ME library with scanbody and abutment geometries for exocad DentalCAD.
Implants
iSy Gingividual-basic for Ti-base-CADCAM
Camlog iSy Gingividual-basic for Ti-base-CADCAM
Camlog iSy Gingividual-basic Ti-Base library for the iSy CADCAM workflow, used in exocad DentalCAD to design restorations bonded onto the iSy titanium base.
Implants
COMFOUR abutment multiunit support
Camlog COMFOUR abutment multiunit support
Camlog COMFOUR abutment and Multi-Unit (MU) support library for designing screw-retained superstructures in exocad DentalCAD.
Implants
CONELOG abutment CAM Ti-blank IAC ME SmartShape 6-cam
Camlog CONELOG abutment CAM Ti-blank IAC ME SmartShape 6-cam
Camlog CONELOG CAM Ti-blank IAC ME SmartShape abutment with 6-cam indexing for exocad DentalCAD, intended for milled custom abutments on CONELOG.
Implants
iSy multiunit
Camlog iSy multiunit
Camlog iSy Multi-Unit (MU) component for designing screw-retained bridges and full-arch restorations in exocad DentalCAD.
Implants
iSy scanbody titanium base
Camlog iSy scanbody titanium base
Camlog iSy scanbody and Ti-Base library for designing implant-supported restorations in exocad DentalCAD.
Implants
CONELOG abutment CAM CoCr-blank ME 6-cam
Camlog CONELOG abutment CAM CoCr-blank ME 6-cam
Camlog CONELOG abutment CAM CoCr-blank ME 6-cam library for designing CoCr-milled CONELOG abutments in exocad DentalCAD.
Implants
CONELOG Ti-base CADCAM free crown SmartShape 6-cam
Camlog CONELOG Ti-base CADCAM free crown SmartShape 6-cam
Camlog CONELOG Ti-base CADCAM free crown SmartShape 6-cam library with Ti-Base and crown components for individualised SmartShape designs in exocad DentalCAD.
Implants
CAMLOG Gingividual-basic for Ti-base-CADCAM
Camlog CAMLOG Gingividual-basic for Ti-base-CADCAM
Camlog CAMLOG Gingividual-basic Ti-Base library for exocad DentalCAD, used to design individualised crowns bonded on Camlog titanium bases.
Implants
CONELOG COMFOUR multiunit
Camlog CONELOG COMFOUR multiunit
Camlog CONELOG COMFOUR Multi-Unit (MU) library for designing screw-retained restorations on the CONELOG conical platform in exocad DentalCAD.
Implants
CONELOG multiunit
Camlog CONELOG multiunit
Camlog CONELOG Multi-Unit (MU) library for exocad DentalCAD, used to design screw-retained restorations on CONELOG multi-unit abutments.
Implants
iSy Gingividual-basic for One-piece-abutment
Camlog iSy Gingividual-basic for One-piece-abutment
Camlog iSy Gingividual-basic abutment library for the one-piece-abutment workflow, used to design individualised emergence profiles in exocad DentalCAD.
Implants
CERALOG-PL Bonding-base
Camlog CERALOG-PL Bonding-base
Camlog CERALOG-PL bonding base (Ti-Base) library for exocad DentalCAD, used to design suprastructures for the CERALOG-PL ceramic implant system.
Implants
CONELOG Gingividual-basic for Ti-base-CADCAM
Camlog CONELOG Gingividual-basic for Ti-base-CADCAM
Camlog CONELOG Gingividual-basic Ti-Base library for designing CAD/CAM superstructures on prefabricated titanium bases in exocad DentalCAD.
Implants
iSy multi cap titanium base
Camlog iSy multi cap titanium base
Camlog iSy multi cap Ti-Base component for designing crowns and bridges on the iSy multi cap interface in exocad DentalCAD.
Implants
CONELOG abutment CAM ti-blank IAC ME
Camlog CONELOG abutment CAM ti-blank IAC ME
Camlog CONELOG CAM ti-blank IAC ME abutment geometry for exocad DentalCAD, used to design custom titanium abutments on the CONELOG interface.
Implants
conelog one piece abutment CAM CoCr-Blank type ME
Camlog conelog one piece abutment CAM CoCr-Blank type ME
Camlog CONELOG one piece abutment library for exocad DentalCAD on a CoCr blank of type ME, defining the abutment geometry for the CONELOG connection.
Implants
CONELOG Ti-base CADCAM crown SmartShape 6-cam
Camlog CONELOG Ti-base CADCAM crown SmartShape 6-cam
Camlog CONELOG Ti-base CADCAM crown SmartShape 6-cam library with Ti-Base and crown geometry for implant crown design in exocad DentalCAD.
Implants
iSy multi cap gingiva former CAM Ti Blank type IAC ME
Camlog iSy multi cap gingiva former CAM Ti Blank type IAC ME
Camlog iSy multi cap gingiva former library on the CAM Ti Blank type IAC ME geometry, used for designing iSy restorations in exocad DentalCAD.
Implants
iSy multi cap one piece abutment CAM CoCr-Blank type ME
Camlog iSy multi cap one piece abutment CAM CoCr-Blank type ME
Camlog iSy multi cap one-piece abutment library, CAM CoCr-Blank type ME configuration, for designing implant-supported restorations in exocad DentalCAD.
Implants
CAMLOG ti-base CADCAM free crown
Camlog CAMLOG ti-base CADCAM free crown
Camlog CAMLOG Ti-Base 'free crown' library for exocad DentalCAD, providing coping/crown components for single implant crowns with extended design freedom on Camlog titani
Implants
iSy Gingividual-basic for Ti-base-CADCAM-free
Camlog iSy Gingividual-basic for Ti-base-CADCAM-free
Camlog iSy Gingividual-basic Ti-Base library for the iSy CADCAM-free variant, used in exocad DentalCAD to design restorations bonded onto the iSy titanium base.
Implants
iSy scanbody implant base
Camlog iSy scanbody implant base
Camlog iSy implant-base set with scanbody and Ti-Base components for designing bonded restorations directly on the iSy implant in exocad DentalCAD.
Implants
CAMLOG Gingividual-basic for Ti-base-CADCAM-free
Camlog CAMLOG Gingividual-basic for Ti-base-CADCAM-free
Camlog CAMLOG Gingividual-basic Ti-Base free library for exocad DentalCAD, used to design crowns on Camlog titanium bases with extra clearance.
Nothing found
FAQ — Camlog
How do I install a Camlog library in exocad DentalCAD?
After signing in, click the "Download" button to receive the file directly. Unzip the archive and place the library folder into the exocad DentalCAD implant library directory, or add it through the exocad Library Manager, then restart the program so the new library appears in the implant selection list.
How many Camlog libraries are in the catalog?
The catalog contains 51 Camlog products, including lines such as Camlog CAD-CAM Camlog Ti Base and Camlog CAMLOG COMFOUR multiunit, covering titanium base and multi-unit geometries for DentalCAD implant design.
What are Camlog libraries used for in the DentalCAD workflow?
They provide the implant-level geometries — titanium bases, abutments and multi-unit components such as the COMFOUR system — that DentalCAD needs to design screw-retained crowns, bridges and full-arch restorations on Camlog implants, aligning the digital design with the physical prosthetic components.
What format are Camlog libraries delivered in?
Each library is delivered as a ZIP archive containing the exocad DentalCAD library files. After unzipping, the folder is placed in the DentalCAD implant library directory or loaded via the exocad Library Manager, making it compatible with standard exocad DentalCAD implant design workflows.