Glidewell/Hahn · exocad DentalCAD — Implants Implants 56

Glidewell/Hahn ZI

Name: Glidewell/Hahn ZI
Brand: Glidewell/Hahn
Availability: InStock

Glidewell_ZI.zip · 1.2 МБ

Glidewell/Hahn ZI is an implant library prepared for exocad DentalCAD that targets the ZI interface from Glidewell/Hahn. It feeds exocad the implant-side geometry required to position the digital restoration accurately on the master model. During project setup the technician selects this library so the wizard recognises the implant and applies appropriate emergence and screw-access constraints.

The library is intended for crown and bridge work on Glidewell/Hahn ZI implants and supports both single-tooth and multi-unit planning. It can be used for cement- or screw-retained prosthetics depending on the case. It is aimed at dental technicians and CAD designers handling Glidewell/Hahn implant cases on a regular basis. The library can be downloaded for use in exocad DentalCAD.

Report an error

#exocad-implant #implant #glidewell-hahn

Similar libraries

Glidewell/Hahn · EV LABDP

Glidewell/Hahn EV LABDP

Glidewell/Hahn EV LABDP implant library for exocad DentalCAD, supplying the EV LABDP geometry used when designing implant-supporte

Glidewell/Hahn · NB-AC

Glidewell/Hahn NB-AC

Glidewell/Hahn NB-AC implant library for exocad DentalCAD, providing the NB-AC interface for designing implant-supported restorati

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the