DIO · exocad DentalCAD — Implants Implants 73

DIO UF Sub Cemented ABT SSCA 65505

DIO_UF_Sub_Cemented_ABT_SSCA_65505.zip · 2.3 МБ

DIO UF Sub Cemented ABT SSCA 65505 is a single-reference abutment library prepared for exocad DentalCAD. It carries the geometry of one specific DIO UF Submerged SSCA abutment used as a basis for cement-retained restorations. In the implant dialog the designer chooses the DIO position and assigns this abutment, after which the crown or bridge is modelled directly over the loaded geometry.

The accuracy of the margin line, axis and emergence profile is essential for a passive fit, which is why an original library is preferred. Typical scope of work covers cement-retained single crowns and short bridges on DIO implants. The file is available for download from the catalog.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

DIO · UF Sub Cemented ABT SSCA 75104

DIO UF Sub Cemented ABT SSCA 75104

Abutment library DIO UF Sub Cemented ABT SSCA 75104 for exocad DentalCAD, designed for cement-retained restorations on the matchin

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.