DIO · exocad DentalCAD — Implants Implants 17

DIO UF Sub Cemented ABT SSCA 75504

DIO_UF_Sub_Cemented_ABT_SSCA_75504.zip · 2.4 МБ

DIO UF Sub Cemented ABT SSCA 75504 is an abutment entry for exocad DentalCAD covering one specific DIO sub-cemented component. The library carries the outer profile and seating face that DentalCAD needs to position the restoration cement gap and margin.

The technician selects SSCA 75504 from the DIO list in the implant wizard and proceeds to design a single crown or short bridge for cement retention. With the geometry matched to the real part, the final restoration fits cleanly on the abutment in the mouth.

It is a practical addition for labs already restoring DIO implants with prefabricated abutments. The library can be downloaded and used directly in standard exocad implant projects.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.