DIO · exocad DentalCAD — Implants Implants 39

DIO UF Sub Cemented ABT SSCA 75307

DIO_UF_Sub_Cemented_ABT_SSCA_75307.zip · 2.4 МБ

DIO UF Sub Cemented ABT SSCA 75307 is a targeted CAD library that delivers the SSCA 75307 cemented abutment of the DIO UF Submerged system into exocad DentalCAD. It is built around the abutment geometry, giving the designer a precise digital reference for shoulder, axis and clearance of the physical part.

During implant project setup in exocad the abutment is selected from this library, and the crown or short bridge is then modelled with correct emergence and occlusal anatomy. It is intended for laboratories producing cement-retained restorations on prefabricated DIO abutments who want a streamlined digital workflow. The library is available for download from the catalogue and slots neatly into existing DIO implant cases.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.