DIO · exocad DentalCAD — Implants Implants 37

DIO UF Sub Cemented ABT SSCA 75107

DIO_UF_Sub_Cemented_ABT_SSCA_75107.zip · 2.3 МБ

DIO UF Sub Cemented ABT SSCA 75107 is a narrowly scoped exocad DentalCAD library covering a single DIO UF Submerged SSCA abutment. It is used in the implant module as the substructure on which a cement-retained crown or bridge is designed. After selecting the matching DIO position the technician proceeds with margin definition, anatomy modelling and contact control as on any other implant case.

The geometry corresponds to the original DIO component, which supports a predictable fit between the milled restoration and the physical abutment. This library is mainly useful for laboratories that handle DIO UF restorative cases on a regular basis. It can be downloaded from the catalog.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.