DIO · exocad DentalCAD — Implants Implants 42

DIO UF Sub Cemented ABT SSCA 65204

DIO_UF_Sub_Cemented_ABT_SSCA_65204.zip · 2.3 МБ

DIO UF Sub Cemented ABT SSCA 65204 covers the CAD geometry for the DIO UF Submerged cemented abutment with reference SSCA 65204. Inside exocad DentalCAD it is selected from the implant list so the software knows the exact prosthetic shape under the future restoration.

Only the abutment is supplied in this entry, which is enough for designing single crowns, copings or short bridges directly on the abutment. The designer can target cement- or screw-retained restorations depending on the indication. Choosing the correct DIO reference keeps the margin position, height and emergence consistent with the manufactured part.

The library is available to download from our catalog and is useful for any lab that routinely supports DIO implants.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.