DIO · exocad DentalCAD — Implants Implants 42

DIO UF Sub Cemented ABT SSCA 55504

DIO_UF_Sub_Cemented_ABT_SSCA_55504.zip · 2.3 МБ

DIO UF Sub Cemented ABT SSCA 55504 is an exocad DentalCAD library that contains the CAD model of this specific DIO UF Submerged Cemented abutment. After it is added to the lab's library set, the part can be picked from the implant selection list when a new implant case is started in exocad.

From that moment on the software treats the abutment as the geometric reference for margins, insertion axis and screw access of the planned restoration. Only the abutment is part of this library, keeping the scope clear. It is intended for technicians and CAD designers who handle DIO restorations and need an exact digital twin of the physical component for crown and bridge work. The library is available for download from the catalog.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.