DIO · exocad DentalCAD — Implants Implants 58

DIO UF Sub Cemented ABT SSCA 45505

DIO_UF_Sub_Cemented_ABT_SSCA_45505.zip · 2.3 МБ

DIO UF Sub Cemented ABT SSCA 45505 is a focused abutment library for exocad DentalCAD that represents the DIO UF Sub cemented abutment with reference SSCA 45505. It supplies the abutment geometry so the implant wizard can place and align the planned restoration on top of the correct DIO component.

Technicians use it when designing crowns or bridges that sit on this specific prefabricated abutment from the DIO UF Sub portfolio. The library can be downloaded and slots into the regular DentalCAD design routine. It is a practical choice for laboratories that work with DIO and need an exact digital twin of the SSCA 45505 abutment for accurate margin, axis and emergence design.

Relying on manufacturer-aligned geometry keeps the CAD outcome in step with the physical part used in the mouth.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.