Dentsply Sirona · exocad DentalCAD — Implants Implants 93

Dentsply Sirona Pre-milled blanks Biomet 3i Osseotite Ti

Dentsply_Sirona_Pre-milled_blanks_Biomet_3i_Osseotite_Ti_Intraoral.zip · 800 КБ
Register to downloadGet PRO Quick sign-up in 30 secondsLibraries of this brand unlock with a PRO subscription.
Included in PRO
  • Access to all popular brands
  • The whole catalog in one link
  • Updates and catalog additions

The library provides the Dentsply Sirona titanium pre-milled blank geometry for the Biomet 3i Osseotite interface. Inside exocad DentalCAD it is used to align the restoration to the available Ti blank so the part can be milled without redoing the connection geometry.

The Osseotite seating surface is preserved within the library to maintain accurate fit on the implant. The geometry is suitable for single crowns as well as connected structures, in cement- or screw-retained designs. It is intended for technicians milling Ti pre-milled stock for Biomet 3i Osseotite implants. The set can be downloaded from the catalog for use with exocad DentalCAD.

Report an error
#exocad-implant#implant#dentsply-sirona
PRO

Unlock PRO access

All popular brands and the whole catalog in one link. Pay by card, SBP or crypto.

$30 · 2400 ₽ · 30 days
СБП ₿ Secure payment: Mastercard, SBP or crypto
Get PRO
Pay after installation

We install any version of digital dentistry software

exocad, exoplan, exocad DentalCAD, RealGUIDE and more — installed and configured on your computer. Pay after installation.

Contact support

Similar libraries

93
Dentsply Sirona · Pre-milled blanks Biomet 3i Osseotite CoCr

Dentsply Sirona Pre-milled blanks Biomet 3i Osseotite CoCr

Dentsply Sirona pre-milled blank library for Biomet 3i Osseotite in CoCr, for implant restoration design in exocad DentalCAD.

88
Dentsply Sirona · Pre-milled blanks Biomet 3i Osseotite CoCr AtlantisFLO

Dentsply Sirona Pre-milled blanks Biomet 3i Osseotite CoCr AtlantisFLO

Dentsply Sirona AtlantisFLO CoCr pre-milled blank library for Biomet 3i Osseotite, used in exocad DentalCAD implant restoration de

36
AB Dental · Pre-Milled Blanks

AB Dental Pre-Milled Blanks

AB Dental Pre-Milled Blanks library defining pre-milled blank geometries for AB Dental implants, ready to use in exocad DentalCAD.

63
BEGO · Semados Pre-milled SCSCXRSRSXRI

BEGO Semados Pre-milled SCSCXRSRSXRI

BEGO Semados Pre-milled SCSCXRSRSXRI is a BEGO library for exocad DentalCAD that enables design of restorations on BEGO Semados pr

95
Straumann · Pre milled Abutment AG Holder local milling

Straumann Pre milled Abutment AG Holder local milling

Straumann Pre milled Abutment AG Holder library for exocad DentalCAD with the abutment geometry for local milling of Straumann pre

94
Straumann · Pre milled Abutment Medentika Holder local milling

Straumann Pre milled Abutment Medentika Holder local milling

Straumann Pre milled Abutment Medentika Holder library for exocad DentalCAD with the abutment geometry for local milling of Straum

92
MIS · MIS C1 V3 PRE-MILLED IO

MIS MIS C1 V3 PRE-MILLED IO

MIS MIS C1 V3 PRE-MILLED IO is a pre-milled blank library for MIS C1 V3 in exocad DentalCAD, used for implant-supported restoratio

86
Zimmer Biomet · Hybrid-3i Osseotite BO

Zimmer Biomet Hybrid-3i Osseotite BO

Zimmer Biomet Hybrid-3i Osseotite BO library for exocad DentalCAD with the digital interface needed to design restorations on this