BEGO · exocad DentalCAD — Implants Implants 64

BEGO CADAbut 1 1 D

Name: BEGO CADAbut 1 1 D
Brand: BEGO
Availability: InStock

BEGO_CADAbut_1_1_D.zip · 3.2 МБ

BEGO CADAbut 1 1 D is a dedicated implant library for exocad DentalCAD built around the BEGO CADAbut 1 1 D geometry. It supplies the digital reference data the CAD module needs to position the restoration correctly relative to the implant interface.

In the exocad workflow the library is selected at the start of an implant case and drives the alignment and margin of the designed restoration. It is suitable for cement- or screw-retained crowns and small bridges supported on the corresponding BEGO component.

CAD designers benefit from a consistent fit between the virtual model and the physical part. The library is available to download and can be used immediately in production cases. It targets dental technicians who routinely restore BEGO implants in exocad.

Report an error

#exocad-implant #implant #bego

Similar libraries

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADAbut 0 1 D

BEGO CADAbut 0 1 D

BEGO CADAbut 0 1 D library for exocad DentalCAD, containing the implant geometry needed to design restorations on the BEGO CADAbut

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

DIO · UF Sub Cemented ABT SSCA 65505

DIO UF Sub Cemented ABT SSCA 65505

Abutment geometry library DIO UF Sub Cemented ABT SSCA 65505 for exocad DentalCAD, prepared for cement-retained design on the matc

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

DIO · UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407

DIO UF Sub Cemented ABT SSCA 55407 supplies the matching abutment CAD geometry for use with exocad DentalCAD on DIO implant cases.

Paltop · MUA

Paltop MUA

Paltop MUA library for exocad DentalCAD, providing Multi-Unit (MU) geometry for designing screw-retained bridges and full-arch res