Osstem/Hiossen · exocad DentalCAD — Implants Implants 94

Osstem/Hiossen OSS TSIII RP Implant-level

IPD_OSS_TSIII_RP_Implant-level_fda.zip · 1.3 МБ
Register to downloadGet PRO Quick sign-up in 30 secondsLibraries of this brand unlock with a PRO subscription.
Included in PRO
  • Access to all popular brands
  • The whole catalog in one link
  • Updates and catalog additions

This library defines the Osstem/Hiossen OSS TSIII RP Implant-level interface inside exocad DentalCAD. It is matched to the regular platform of the TSIII implant system and enables a direct implant-level workflow without a separate stock abutment.

In the DentalCAD implant wizard the geometry is picked as the connection for the chosen tooth position and serves as the reference for the modelled restoration. From this base the designer can build cement- or screw-retained crowns and bridges.

The library is available to download and is convenient for laboratories that handle Osstem and Hiossen TSIII RP cases at implant level on a regular basis.

Report an error
#exocad-implant#implant#osstem-hiossen
PRO

Unlock PRO access

All popular brands and the whole catalog in one link. Pay by card, SBP or crypto.

$30 · 2400 ₽ · 30 days
СБП ₿ Secure payment: Mastercard, SBP or crypto
Get PRO
Pay after installation

We install any version of digital dentistry software

exocad, exoplan, exocad DentalCAD, RealGUIDE and more — installed and configured on your computer. Pay after installation.

Contact support

Similar libraries

93
Osstem/Hiossen · OSS TSIII NP Implant-level

Osstem/Hiossen OSS TSIII NP Implant-level

Osstem/Hiossen OSS TSIII NP Implant-level geometry for exocad DentalCAD, covering the narrow platform of the TSIII system for impl

80
Osstem/Hiossen · OSS TSIII RP Implant-level-Angled

Osstem/Hiossen OSS TSIII RP Implant-level-Angled

Osstem/Hiossen OSS TSIII RP Implant-level-Angled library for exocad DentalCAD, describing the angled implant-level geometry of the

66
Adin · Dir Con To Implant

Adin Dir Con To Implant

Adin DirConToImplant library with direct-to-implant geometries for designing restorations straight on the Adin connection in exoca

64
Implant Direct · Temp Non Engaging Abutments

Implant Direct Temp Non Engaging Abutments

Implant Direct temporary non-engaging abutment geometry for exocad DentalCAD in Non-engaging and FDA · Non-engaging variants for p

56
Implant Direct · Smart Base Cylinders

Implant Direct Smart Base Cylinders

Implant Direct SmartBaseCylinders library for exocad DentalCAD, providing the SmartBase cylinder geometry used to design implant-s

92
Dentsply Sirona · Atlantis abutment Model Printing-Nobel Osstem-Hiossen Osstem TS

Dentsply Sirona Atlantis abutment Model Printing-Nobel Osstem-Hiossen Osstem TS

Dentsply Sirona Atlantis Model Printing abutment library for the Osstem-Hiossen Osstem TS interface, prepared for exocad DentalCAD

89
Dentsply Sirona · Pre-milled blanks Osstem Hiossen CoCr AtlantisIO-FLO

Dentsply Sirona Pre-milled blanks Osstem Hiossen CoCr AtlantisIO-FLO

Dentsply Sirona Osstem/Hiossen CoCr AtlantisIO-FLO pre-milled blank library for exocad DentalCAD, enabling design of CoCr implant

87
MIS · MIS C1 STD Implant-level

MIS MIS C1 STD Implant-level

MIS C1 STD Implant-level library for exocad DentalCAD, defining the implant-level interface of the MIS C1 STD system.