DIO · exocad DentalCAD — Implants Implants 56

DIO UF Sub Hybrid Link UNHl 40551

DIO_UF_Sub_Hybrid_Link_UNHl_40551.zip · 664 КБ

DIO UF Sub Hybrid Link UNHl 40551 contains the Link component for the UNHl 40551 hybrid base in the DIO UF Submerged range, prepared for exocad DentalCAD. During implant case setup the designer selects this library so the software references the correct interface geometry.

From that point exocad's standard tools are used to design crowns or small bridge superstructures over the link. The library suits laboratories handling DIO UF Sub work who need exact matching between digital model and titanium part. Each UNHl variant is shipped separately, keeping the library list transparent and aligned with the stock at the bench. The library can be downloaded for use in DentalCAD projects.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Hybrid Link UNHl 40552

DIO UF Sub Hybrid Link UNHl 40552

DIO UF Sub Hybrid Link UNHl 40552: Link geometry for the UNHl 40552 hybrid component on DIO UF Sub, for exocad DentalCAD.

DIO · UF Sub Hybrid Link UNHl 40402

DIO UF Sub Hybrid Link UNHl 40402

DIO UF Sub Hybrid Link UNHl 40402: Link geometry for the UNHl 40402 DIO hybrid component on UF Sub, for exocad DentalCAD.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Glidewell/Hahn · NB-RP Hybrid Bar

Glidewell/Hahn NB-RP Hybrid Bar

Glidewell/Hahn NB-RP Hybrid Bar library for exocad DentalCAD, providing bar geometry for hybrid restorations on the NB-RP interfac

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat