DIO · exocad DentalCAD — Implants Implants 30

DIO UF Sub Digital ABT DPR 4540

DIO_UF_Sub_Digital_ABT_DPR_4540.zip · 2.5 МБ

DIO UF Sub Digital ABT DPR 4540 brings the DIO UF Submerged digital abutment, in the 4540 reference, into the exocad DentalCAD implant module. After being added to the catalogue it appears in the case wizard whenever a DIO interface is needed, and exocad uses it to align the restoration with the implant axis.

The component is then visible during waxing-up, so crowns, bridges or hybrid restorations can be modelled with an accurate fit. Both cement- and screw-retained restorations can be planned on top of it depending on the clinical case. The library is freely available to download and integrate with an existing exocad setup. It is intended for laboratories and CAD designers that regularly produce work on DIO UF Submerged implants.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Digital ABT DPR 1555

DIO UF Sub Digital ABT DPR 1555

DIO UF Sub Digital ABT DPR 1555 abutment library for exocad DentalCAD, providing the DPR 1555 geometry to design implant-supported

DIO · UF Sub Digital ABT DPR 3570

DIO UF Sub Digital ABT DPR 3570

DIO UF Sub Digital ABT DPR 3570 abutment library for exocad DentalCAD, dedicated to the DIO UF Submerged digital workflow in size

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.