DIO · exocad DentalCAD — Implants Implants 23

DIO UF Sub DIgital ABT DLN 2570

DIO_UF_Sub_DIgital_ABT_DLN_2570.zip · 1.5 МБ

DIO UF Sub DIgital ABT DLN 2570 is a CAD library prepared for use inside exocad DentalCAD with DIO UF Sub DIgital ABT components. Its core content is the abutment geometry that DentalCAD references when constructing the restoration interface.

The technician assigns the library during the implant step, ensuring the digital design matches the physical DIO part on the model. From there, single crowns, multi-unit bridges or screw-retained hybrid restorations can be built in the usual exocad workflow.

The library is available for download and integrates with the standard implant project in DentalCAD. It is intended for laboratory CAD designers and technicians who routinely restore DIO implants.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub DIgital ABT DCR 2570

DIO UF Sub DIgital ABT DCR 2570

Abutment library DIO UF Sub DIgital ABT DCR 2570 for the DIO UF Submerged interface, ready for implant design in exocad DentalCAD.

DIO · UF Sub DIgital ABT DLN 5570

DIO UF Sub DIgital ABT DLN 5570

DIO UF Sub DIgital ABT DLN 5570 — abutment library for exocad DentalCAD with the DIO UF Submerged DLN 5570 digital abutment geomet

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.