DIO · exocad DentalCAD — Implants Implants 47

DIO UF Sub Cemented ABT UNSCA 40407

DIO_UF_Sub_Cemented_ABT_UNSCA_40407.zip · 846 КБ

DIO UF Sub Cemented ABT UNSCA 40407 provides the abutment reference required by exocad DentalCAD when restoring DIO UF implants. Only the abutment component is included; it carries the matching shoulder, axis and screw access used by the crown design tools.

After selecting it in the implant dialog the technician obtains the correct interface for digital wax-up, margin definition and crown export to CAM. The geometry is suitable for cement- or screw-retained single crowns and short-span bridges.

It is available for download from the catalog and can be added to the existing implant library set. A practical option for laboratories that routinely process DIO UF prosthetic cases.

Report an error

#exocad-implant #implant #dio

Similar libraries

DIO · UF Sub Cemented ABT UNSCA 40405

DIO UF Sub Cemented ABT UNSCA 40405

Abutment geometry DIO UF Sub Cemented ABT UNSCA 40405 by DIO for designing implant restorations in exocad DentalCAD on the UF plat

DIO · UF Sub Cemented ABT UNSCA 40205

DIO UF Sub Cemented ABT UNSCA 40205

DIO UF Sub Cemented ABT UNSCA 40205 abutment geometry for the DIO UF Submerged platform, ready for use in exocad DentalCAD.

Cowellmedi · Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid

Cowellmedi Sub R Ti A S06 conid library for exocad DentalCAD, providing the digital geometry needed to design restorations on the

Cowellmedi · Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid

Cowellmedi Sub R MU Bar 55 conid library for exocad DentalCAD with Multi-Unit (MU) and bar geometry for full-arch screw-retained w

Anthogyr · Anthogyr-Labside-XBase-SA

Anthogyr Anthogyr-Labside-XBase-SA

Anthogyr Labside XBase SA implant library for exocad DentalCAD, supplying the reference geometry for designing implant-supported r

BEGO · CADAbut 8 2 DO

BEGO CADAbut 8 2 DO

BEGO CADAbut 8 2 DO library for exocad DentalCAD that delivers the BEGO CADAbut 8 2 DO prosthetic reference for implant-supported

BEGO · CADBar 8 1 AN

BEGO CADBar 8 1 AN

BEGO CADBar 8 1 AN implant library for exocad DentalCAD, describing the BEGO CADBar 8/1 AN geometry for implant-supported restorat

Anthogyr · Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Anthogyr-Labside-Temp-Monobloc-MDT

Anthogyr Labside Temp Monobloc MDT library with temporary component geometry for one-piece provisionals in exocad DentalCAD.