Implants
SuperLine Ti-Base Link 5510
Dentium SuperLine Ti-Base Link 5510
Dentium SuperLine 5510 Ti-Base and Link geometries for exocad DentalCAD, used as the digital reference when designing crowns or bridges on this implant.
Dentium — exocad DentalCAD — Implants
18 libraries
Dentium — 18 libraries for exocad DentalCAD — Implants in the catalog.
Dentium is a dental implant system whose exocad DentalCAD libraries in this catalog cover titanium-base and custom-abutment geometries for designing implant-supported restorations. The collection includes 18 products, among them Dentium Implantium Custom Abutment 34s and the Dentium NR Line Custom Abutment Standard, Wide and 30s variants, giving CAD technicians ready references for abutment and screw-retained workflows within the DentalCAD implant module.
Implants
NR Line Screw Abutment Ext 4 3mm
Dentium NR Line Screw Abutment Ext 4 3mm
Dentium NR Line Screw Abutment Ext 4.3mm library with abutment geometry for designing restorations on the 4.3 mm external screw abutment in exocad DentalCAD.
Implants
SuperLine Ti-Base Link 4515
Dentium SuperLine Ti-Base Link 4515
Dentium SuperLine 4515 Ti-Base and Link geometries for exocad DentalCAD, intended for designing implant-supported restorations on this specific position.
Implants
NR Line Custom Abutment Standard 30s
Dentium NR Line Custom Abutment Standard 30s
Dentium NR Line Custom Abutment Standard 30s library with abutment geometry for designing custom abutments on Dentium NR implants in exocad DentalCAD.
Implants
SimpleLine II Custom Abutment Int 4 8mm
Dentium SimpleLine II Custom Abutment Int 4 8mm
Dentium SimpleLine II Custom Abutment Int 4.8mm library providing abutment geometry for the 4.8 mm internal SimpleLine II variant in exocad DentalCAD.
Implants
NR Line Screw Abutment Ext 5 2mm
Dentium NR Line Screw Abutment Ext 5 2mm
Dentium NR Line Screw Abutment Ext 5.2mm library with abutment geometry for designing on the 5.2 mm external screw abutment in exocad DentalCAD.
Implants
NR Line Custom Abutment Wide
Dentium NR Line Custom Abutment Wide
Dentium NR Line Custom Abutment Wide library providing the abutment geometry for the wide variant of Dentium NR implants in exocad DentalCAD.
Implants
SuperLine Ti-Base Link 4505
Dentium SuperLine Ti-Base Link 4505
Dentium SuperLine 4505 Ti-Base and Link geometries for exocad DentalCAD, used to design implant-supported crowns and bridges on the SuperLine interface.
Implants
SimpleLine II Custom Abutment Int 6 5mm
Dentium SimpleLine II Custom Abutment Int 6 5mm
Dentium SimpleLine II Custom Abutment Int 6.5mm library with abutment geometry for the wider 6.5 mm internal SimpleLine II variant in exocad DentalCAD.
Implants
SuperLine Custom Abutment SE
Dentium SuperLine Custom Abutment SE
Dentium SuperLine Custom Abutment SE library for exocad DentalCAD, supplying the abutment geometry for individual abutment design on SuperLine implants.
Implants
SuperLine Screw Abutment Ext 4 5mm
Dentium SuperLine Screw Abutment Ext 4 5mm
Dentium SuperLine Screw Abutment Ext 4.5 mm library for exocad DentalCAD, with the abutment geometry for the extended screw abutment in the 4.5 mm size.
Implants
Implantium Custom Abutment 34s
Dentium Implantium Custom Abutment 34s
Dentium Implantium Custom Abutment 34s library for exocad DentalCAD, supplying the abutment geometry of the Implantium 34s interface for custom abutment design.
Implants
SimpleLine II Screw Abutment 6 5mm
Dentium SimpleLine II Screw Abutment 6 5mm
Dentium SimpleLine II Screw Abutment 6.5 mm library for exocad DentalCAD, providing the abutment geometry for restorations on this taller screw abutment variant.
Implants
SuperLine Custom Abutment SW
Dentium SuperLine Custom Abutment SW
Dentium SuperLine Custom Abutment SW library for exocad DentalCAD, supplying the SW custom abutment geometry for individualised SuperLine restorations.
Implants
SimpleLine II Screw Abutment 4 8mm
Dentium SimpleLine II Screw Abutment 4 8mm
Dentium SimpleLine II Screw Abutment 4.8 mm library for exocad DentalCAD, containing the abutment geometry for designing implant-supported restorations.
Implants
SuperLine Ti-Base Link 5520
Dentium SuperLine Ti-Base Link 5520
Dentium SuperLine 5520 Ti-Base and Link components for exocad DentalCAD, used to design implant-supported restorations matched to the original titanium base.
Implants
NR Line Custom Abutment Standard
Dentium NR Line Custom Abutment Standard
Dentium NR Line Custom Abutment Standard library for exocad DentalCAD, providing the standard abutment geometry of the Dentium NR Line for custom abutment design.
Implants
SuperLine Screw Abutment Ext 5 5mm
Dentium SuperLine Screw Abutment Ext 5 5mm
Dentium SuperLine Screw Abutment Ext 5.5 mm library for exocad DentalCAD, containing the abutment geometry for the larger 5.5 mm extended screw abutment.
Nothing found
FAQ — Dentium
How do I install a Dentium library in exocad DentalCAD?
After signing in, use the Download button to receive the file directly. Unzip the archive and place the library folder into the exocad DentalCAD implant library directory, or add it through exocad Library Manager, then restart DentalCAD so the new Dentium components appear in the implant module.
How many Dentium libraries are available in the catalog?
The catalog contains 18 Dentium products, including Dentium Implantium Custom Abutment 34s and several Dentium NR Line Custom Abutment variants such as Standard, Standard 30s and Wide.
What are Dentium libraries used for in the DentalCAD workflow?
They supply the titanium-base, custom-abutment and related geometries needed to design implant-supported crowns, bridges and screw-retained restorations in exocad DentalCAD, letting the technician select the matching Dentium component and generate a printable abutment or framework design.
What format are the Dentium libraries delivered in?
Each library is delivered as a ZIP archive containing the files required by exocad DentalCAD. After extraction the folder is compatible with the DentalCAD implant library system and can be loaded through exocad Library Manager.